Home > A Style Insert

A Style Insert

Toyota Windshield Wiper inserts installation instructions for Wiper Insert Style A

The "A" style Toyota wiper blade insert/refill is easily identifiable by the following characteristics:

A small, triangular top ridge that attaches to the one piece metal support rib.

Below that are two edges which extend from the center line of the insert, the top edge being shorter than the bottom edge.

Below the bottom, longer edge is the tall, triangular wiping edge which contacts the windshield.

Both ends of this refill are identical.

On this style of insert, the metal support rib would remain in place attached to the wiper blade assembly and only the rubber insert itself would be removed by sliding the insert/refill out from the support rib channel.