Temporary Price Reduction - Very limited supply
Alert !! "Free Shipping over $200.00" offer does NOT apply to this item!
Please note: This item can only be shipped via ground service.
- Application: Spray On
- Applicator: Aerosol spray tip
- Color: Gray
- Container: Pressurized aluminum aerosol can
- Finish: Flat||Matte
- Quantity: 11 ounce
- Temperature Rating: 1300°F - 2000°F (704°C - 1093°C)
- Instructions: See important notes at the bottom of this page.
Please Note:Please note: This item can only be shipped via ground service.VHT Flameproof™ Coating only attains its unique heat resistant properties after proper curing.
Preparation: Surface must be clean and free of all debris before applying any primer or paint. We recommend our StripFast® surface preparation and Flameproof™ Primer products.
Drying Time: Curing time is required and can be done either on or off of the vehicle.
On the Vehicle:Paint must be completely dry before beginning curing process.Run engine at idle for 10 minutes.Let engine cool for 20 minutes.Run engine again at idle for 20 minutes.Let cool for 20 minutes.Run engine under normal operating conditions for 30 minutes.
Off the Vehicle:Paint must be completely dry before beginning curing process.Heat to 250°F (121°C) for 30 minutes.Let cool for 30 minutes.Heat to 400°F (204°C) for 30 minutes.Let cool for 30 minutes.Heat to 650°F (343°C) for 30 minutes.Let cool for 30 minutes.
Warning: Do NOT exceed the temperature of the least heat tolerant component or of the base metal.
Clear Coat: We recommend our Flameproof™ Clear product.