Installing flush mount valve stems will require you to remove the tire from the wheel and putting it on like you would any other valve stem. Instead of sticking straight out like standard chrome valve stems, these Excalibur flush mount valve stems sit flatter against the wheel for a nice, integrated look. Regular chrome valve stems can look a bit funky sticking out on a nice set of custom rims. To fill your tires you will need to make sure you keep the filler tube handy and if you happen to lose it, we have replacements available. Durable, triple chrome plating Install as easily as standard valve stems Adds sweet custom look Low-profile style for your wheels Made from steel Slotted top valve stem cap style Includes 4 flush mount valve stems & caps Includes filler tube Slotted Cap Style, Gorilla Brand
Attachment~Bolt-onColor~ChromeDesign~Dual Seal (1 o-ring seal and 1 grommet seal)End Type~Flush Mount w/CapFinish~Chrome Plated (High luster)Fitment~Fits standard 7/16" and 5/8" hole sizesHead~Slotted FlatHeight~0.25" (1/4", 6.35mm)(Visible Outside Wheel w/cap)Length~1.0" (25.4mm)Material~Hardened SteelMount~Inner Mount (nut on back)Outside Diameter~0.75" (3/4", 19mm)(at widest point), 0.68" (11/16", 17.3mm)(cap)Quantity~Set of 4Shank Diameter~0.40" (13/32",10.16mm)Style~Flush Mount w/Slotted CapThread Length~0.65" (21/32", 16.5mm)Kit Includes~Four (4) Flush mount valve stems with red o-ring seal; Four (4) slotted valve stem caps; Four (4) Retainer/mounting nuts w/washers; Four (4) Rubber grommets for 0.45" opening; Four (4) Rubber grommets for 0.62" opening; One (1) Filler tube (# FT1) w/o-ring seal
This kit includes the required Valve Stem Filler Tube which is interchangeable with the Gorilla #FT1 Valve Stem Filler Tube
- Attachment
- Bolt-on
- Color
- Chrome
- Design
- Dual Seal (1 o-ring seal and 1 grommet seal)
- End Type
- Flush Mount w/Cap
- Finish
- Chrome Plated (High luster)
- Fitment
- Fits standard 7/16" and 5/8" hole sizes
- Head
- Slotted Flat
- Height
- 0.25" (1/4", 6.35mm)(Visible Outside Wheel w/cap)
- Length
- 1.0" (25.4mm)
- Material
- Hardened Steel
- Mount
- Inner Mount (nut on back)
- Outside Diameter
- 0.75" (3/4", 19mm)(at widest point), 0.68" (11/16", 17.3mm)(cap)
- Quantity
- Set of 4
- Shank Diameter
- 0.40" (13/32",10.16mm)
- Style
- Flush Mount w/Slotted Cap
- Thread Length
- 0.65" (21/32", 16.5mm)
- Kit Includes
- Four (4) Flush mount valve stems with red o-ring seal; Four (4) slotted valve stem caps; Four (4) Retainer/mounting nuts w/washers; Four (4) Rubber grommets for 0.45" opening; Four (4) Rubber grommets for 0.62" opening; One (1) Filler tube (# FT1) w/o-ring seal
