The Gorilla ET Ultra mag seat wheel locks are manufactured with an external security pattern. Get security for your wheel and tire investment with a set of ET Ultra mag seat wheel locks by Gorilla. The Gorilla ET Ultra mag seat wheel locks are manufactured from heat treated hardened steel. Lock and key engage precisely with each set of Gorilla ET Ultra mag wheel lock set. External security pattern Security for your investment Heat treated hardened steel. Lock and key engage precisely Key code registered to owner Set of 4
Chrome, Gorilla Brand
Color~ChromeConfiguration~Right Hand ThreadDrive~KeyedEnd Type~Closed (Male)Finish~Plated (High luster)Head~External SplinesKey~Included (registered to this set)Key Drive~Hex 13/16" (21mm)Key Length~2.1" (2-1/8", 53.3mm)Key Outside Diameter~1.05" (1-3/64", 26.7mm)Length~1.70" (1-45/64", 43.18mm)Material~Hardened SteelOutside Diameter~1.05" (1-1/16", 26.67mm)(Key)Pattern~Splined (Irregular)Quantity~4 Locks w/KeySeat~Mag E-T (w/60° Taper)Shank Depth~0.30" (7.62mm)Shank Diameter~0.62" (15.75mm) approx.Shank Type~E-T Tapered 60°Thread Size~12mm x 1.5Washers~Sold SeparatelyNote~Set includes a Wheel Lock Key (required for installation/removal) registered specifically to this wheel lock set
It is the installer's responsibility to verify correct fitment for your wheels. Visually verify before installation and contact us or the wheel manufacturer to verify proper fitment.
Washers are sold separately. Click here to see our E/T Ultra lug nut washers to fit this lug nut.
Chrome, Gorilla Brand
If these are not the wheel locks for your vehicle, search all of our Wheel Locks here.
- Color
- Chrome
- Configuration
- Right Hand Thread
- Drive
- Keyed
- End Type
- Closed (Male)
- Finish
- Plated (High luster)
- Head
- External Splines
- Key
- Included (registered to this set)
- Key Drive
- Hex 13/16" (21mm)
- Key Length
- 2.1" (2-1/8", 53.3mm)
- Key Outside Diameter
- 1.05" (1-3/64", 26.7mm)
- Length
- 1.70" (1-45/64", 43.18mm)
- Material
- Hardened Steel
- Outside Diameter
- 1.05" (1-1/16", 26.67mm)(Key)
- Pattern
- Splined (Irregular)
- Quantity
- 4 Locks w/Key
- Seat
- Mag E-T (w/60° Taper)
- Shank Depth
- 0.30" (7.62mm)
- Shank Diameter
- 0.62" (15.75mm) approx.
- Shank Type
- E-T Tapered 60°
- Thread Size
- 12mm x 1.5
- Washers
- Sold Separately
- Note
- Set includes a Wheel Lock Key (required for installation/removal) registered specifically to this wheel lock set
